![]() If the camera does not go into pairing mode perform the following steps: Shortly afterward you should hear “The camera is in pairing mode” and the green LED found on the connector at the end of the camera's wire should flash continuously.The camera will announce, “Device is ready for Use.” Connect the power adapter cord to the wire coming from the camera.NOTE: A surge protector or Uninterruptible Power Supply (UPS) is recommended. Screw in the Wi-Fi Antenna to the Antenna Connector found on the back of the camera.Your Night Owl standalone camera will be shipped with a Wi-Fi antenna, a power adapter cord, and a reset tool.Perform the following procedures within range of your Wi-Fi network.DO NOT mount your camera in its final location until you have successfully added it to the Night Owl Protect app and you are able to see its Live View.Go to the App Store to download and install the Night Owl Protect app. The following procedures require that you have already downloaded and installed the Night Owl Protect app and have created an account.See your camera's setup instructions for further details. Night Owl standalone cameras are Wi-Fi devices that can be added to the Night Owl Protect app either by scanning its QR code, by using the network discovery method, or using the camera's serial number. The recorder has now been added to the Night Owl Protect app. Tap LIVE VIEW to display the Device Settings screen.The recorder is added and the Done screen displays. The default name for the recorder is “Recorder.” Tap Done when you are finished renaming the channels. ![]() There should be as many channels as there are cameras attached.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |